Radial Turbomachinery meshing in ICEM
Posted June 2, 2012 at 05:44 by Far
Tags icem, meshing, radial, turbomachinery
In this thread, I have discussed different issues in meshing and geomtry importe related to radial turbochinary. Geomtry and blocking is also posted here. Feel free to use geomtry and blocking and let me know if you have any diffciultly to handle these type of geometries.
http://www.cfd-online.com/Forums/ans...tml#post337506
http://www.cfd-online.com/Forums/ans...tml#post337506
Total Comments 2
Comments
-
Tutorial for mesh generation of radial compressor by using icem
Hi Islamabad
I am new to icem. Now I need to mesh a radial compressor with splitter blades. Could you give me some advice? I will be very appreciated if there is some tutorials related to mesh generation of radial compressor by using icemPosted April 30, 2014 at 03:03 by dowlee -
no specific tut with icem cfd. But you can do it easily in turbogrid.
Posted April 30, 2014 at 05:55 by Far