How to delete cells in OF based on CheckMesh?
Posted September 26, 2023 at 20:42 by mactone
Seems like a good resource for checking my checkMesh issue.
Quote:
Hi sakro,
Sadly my experience in this subject is very limited, but here are a few threads that might guide you in the right direction:
Best regards and good luck!
Bruno
Sadly my experience in this subject is very limited, but here are a few threads that might guide you in the right direction:
- http://www.cfd-online.com/Forums/ope...ior-cells.html
- Post #6 on this very thread you posted on
As you might notice, the OpenFOAM tutorials seem to be a good source of knowledge even if they don't seem well documented - http://www.cfd-online.com/Forums/ope...e-comment.html
- http://www.cfd-online.com/Forums/ope...-mesh-cad.html
- http://www.cfd-online.com/Forums/ope...nd-tunnel.html
- http://www.cfd-online.com/Forums/ope...directory.html
- http://www.cfd-online.com/Forums/ope...efinemesh.html
Best regards and good luck!
Bruno
Total Comments 0