cfMesh my steps
fms file creation
extraction of edges from stl file
This is to visualize with paraview
#several steps for improving mesh quality
Code:
surfaceToFMS file.stl
Code:
surfaceFeatureEdges file.stl file.fms -angle 30
Code:
FMSToSurface -exportFeatureEdges file.fms fileEdge.fms
Code:
cartesianMesh.exe checkMesh.exe >> log.Mesh1 improveMeshQuality.exe checkMesh.exe >> log.Mesh1 improveMeshQuality.exe checkMesh.exe >> log.Mesh1 improveSymmetryPlanes.exe
Total Comments 1
Comments
-
good work thanks so muchPosted April 11, 2018 at 20:36 by ali sharhri
