|
[Sponsors] |
Projection of face on another and command blkw |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 9, 2006, 09:45 |
Projection of face on another and command blkw
|
#1 |
Guest
Posts: n/a
|
i am trying to model two intersectinf pipes.... to get the intersecting curve, i have used the commnad vproject , but after this when i creat couples, all the cells do not become couples..... as given in the user guide, the command to project a face of a block on shell ... blkw is not working at all..... if anybody knows about this command or any other solution to my problem please reply back....
|
|
June 9, 2006, 10:18 |
Re: Projection of face on another and command blkw
|
#2 |
Guest
Posts: n/a
|
It is probably easier to use stardesign together with one of the automatic meshers instead of learning how to do it in prostar
The correct way to do it with a hex mesh - done with GridPro - can be downloaded here: http://www.beilke-cfd.de/t-junction.mdl.gz |
|
June 9, 2006, 10:31 |
Re: Projection of face on another and command blkw
|
#3 |
Guest
Posts: n/a
|
i don't know anything about stardesign and the file link u told....star cd is not being able to open it....
|
|
June 9, 2006, 10:36 |
Re: Projection of face on another and command blkw
|
#4 |
Guest
Posts: n/a
|
The file is zipped. So you have to unzip it at first.
Stardesign is part of the StarCD package. Have a look at http://www.cd-adapco.com/products/ST...AR-Design.html |
|
June 9, 2006, 10:39 |
Re: Projection of face on another and command blkw
|
#5 |
Guest
Posts: n/a
|
i don't have the adminstator account on this computer and winzip etc is not installed ... if u can unzip it and send it to me or if u can send me the macro for creating it will be even more helpful.... thanks
|
|
June 9, 2006, 10:59 |
Re: Projection of face on another and command blkw
|
#6 |
Guest
Posts: n/a
|
It was not created using a macro but with GridPro (http://www.gridpro.com ).
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Icem "imprint face" command | Lindner | CFX | 1 | July 24, 2008 16:28 |
projection | Ramesh | Main CFD Forum | 4 | July 20, 2006 09:59 |
projection-2 | Tony | Main CFD Forum | 1 | April 1, 2001 09:46 |
Text command of monitor-command? | Mika | FLUENT | 0 | March 27, 2001 14:46 |
projection | Hong | Main CFD Forum | 4 | February 2, 2000 06:21 |