|
[Sponsors] |
OpenFOAM: looking for advice and compressible, nonisothermal tutorial preparation |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 13, 2013, 10:45 |
OpenFOAM: looking for advice and compressible, nonisothermal tutorial preparation
|
#1 |
New Member
Join Date: Jan 2010
Posts: 28
Rep Power: 16 |
Hi everyone:
Apologies--I posted a similar inquiry in the general forum before I knew about this freelancers forum. I want to use OpenFOAM to deal with the compressible, viscous Navier-Stokes equations. I'd like to do nonisothermal, if possible. As far as I know, it is possible to approach such problems with OpenFoam, but I would need advice on getting started and on dealing with such an advanced problem. I'm used to dealing with simpler problems. I have written my own transport code in C++ with Paraview, so the general setup is not that foreign to me; what I really need is help getting started. Would anyone be interested in writing me a tutorial / example and providing some advice? This is for a fun / hobby application for now, so my budget is not large. If you are interested, please message me and we can talk about what you can provide for particular prices. I can also provide more detail, if needed. Thanks a lot. |
|
February 2, 2016, 12:11 |
|
#2 |
New Member
Paul
Join Date: May 2012
Posts: 23
Rep Power: 14 |
What exactly do you mean by "compressible, viscous navier stokes"? Do you have the exact set of equations that you want to solve? As far as I can tell, the viscous term fvm::laplacian(muEff,U) is automatically included in the turbulence model, along with any additional stress terms due to turbulence (if applicable). Could you be more specific about what you mean by "compressible, viscous" ?
Last edited by pmdelgado2; February 2, 2016 at 12:14. Reason: added details, requested more clarification |
|
Tags |
consultants, consulting, open foam, openfoam, tutorial |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Density-based, fully-coupled, compressible solver in OpenFOAM? | francesco_capuano | OpenFOAM Running, Solving & CFD | 7 | November 20, 2018 13:12 |
Difficulty running an inviscid compressible nozzle flow using OpenFOAM | rbozinoski | OpenFOAM Running, Solving & CFD | 11 | December 29, 2015 07:19 |
Finding someone to help with some OpenFOAM code for compressible, nonisothermal flow? | bzz77 | CFD Freelancers | 2 | December 15, 2014 14:36 |
Blow of compressible solver while using K-epsilon model in openfoam | Amit Mathur | OpenFOAM | 16 | October 6, 2013 11:09 |
Sources of help getting started in OpenFoam: nonisothermal viscous compressible 2D? | bzz77 | OpenFOAM Programming & Development | 1 | February 9, 2013 17:54 |