Heat exchanger Freelance Job

careers · December 12, 2014, 10:33

I want to take a closer look at a stream in a heat exchanger with heat transfer and pressure losses. Therefore I am looking for a Freelancer. I am not providing any programs, this should be brought by the Freelancer, but since it is a project and I am looking just for the results I am open for any programs like OpenFoam. Since I try to outsource more there is the possibility to give away jobs even now and then. If you feel you can do it please write me a message including which programms you would use and your ideas of compensation.

symmetry · January 4, 2015, 18:05

Quote:

Originally Posted by careers

I want to take a closer look at a stream in a heat exchanger with heat transfer and pressure losses. Therefore I am looking for a Freelancer. I am not providing any programs, this should be brought by the Freelancer, but since it is a project and I am looking just for the results I am open for any programs like OpenFoam. Since I try to outsource more there is the possibility to give away jobs even now and then. If you feel you can do it please write me a message including which programms you would use and your ideas of compensation.

Hello

can you forward more details of the geometry to peter.arnold@minervadynamics.com and cases to be simulated, so I can estimate timescale and costs. We use the FLOW-3D code for free surface and confined flows. I can discuss rates with you by email.

Thanks

Peter (Minerva Dynamics Limited, UK)

ksegond · January 5, 2015, 11:11

Dear CFD-Online User,
I would be interested to make you an offer for this task. I would solve it with FloEFD.
Could you send me an E-Mail at mail@e-cooling.de with more details.

Jimmy Chokshi · January 7, 2015, 04:34

Kindly mail me more details of the problem on jignesh.chokshi@acricfd.com. So, I can provide time and cost for the analysis.

Thanks

gupta29505 · January 14, 2015, 08:02

Hi,

I have 15 years of experience in applying CFD/FEA for wide range of industry - Automotive, Semiconductor, Comfort, Protection, Manufacturing, CFD software development. When I was in CFD software development/support company, I supported more than 100 commercial client in guiding/solving CFD problems.

Please send me an email at freelancer.cfd@gmail.com and I can provide more details about my projects and we can discuss your project.

Sincerely,
Freelancer

strongrj13 · February 10, 2015, 10:46

Good morning,

I would like more information about what you require. I have over 300 cases of experience in CFD and heat transfer analysis. Please email your requirements to robert.strong@strongsimulationconsulting.com. We work within any budgetary requirements. I would use ANSYS Fluent for the analysis.

December 12, 2014, 10:33	Heat exchanger Freelance Job	#1
careers New Member Join Date: Dec 2014 Posts: 1 Rep Power: 0	I want to take a closer look at a stream in a heat exchanger with heat transfer and pressure losses. Therefore I am looking for a Freelancer. I am not providing any programs, this should be brought by the Freelancer, but since it is a project and I am looking just for the results I am open for any programs like OpenFoam. Since I try to outsource more there is the possibility to give away jobs even now and then. If you feel you can do it please write me a message including which programms you would use and your ideas of compensation.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Double pipe heat exchanger	mohcin	FLUENT	21	June 18, 2016 14:19
How to carry out 3D shell and Tube Heat Exchanger analysis in fluent	medogalal	FLUENT	3	December 30, 2015 04:28
transient source term	strakakl	OpenFOAM	38	November 19, 2013 01:18
Modelling serpentine heat exchanger	andbe	ANSYS	0	September 30, 2013 09:08
Heat Exchanger...TWO	Walid	CFX	2	July 11, 2005 19:04

January 5, 2015, 11:11		#3
ksegond New Member Karim Segond Join Date: Apr 2011 Posts: 3 Rep Power: 15	Dear CFD-Online User, I would be interested to make you an offer for this task. I would solve it with FloEFD. Could you send me an E-Mail at mail@e-cooling.de with more details.

January 7, 2015, 04:34		#4
Jimmy Chokshi New Member Jignesh Chokshi Join Date: Aug 2011 Posts: 7 Rep Power: 14	Kindly mail me more details of the problem on jignesh.chokshi@acricfd.com. So, I can provide time and cost for the analysis. Thanks

January 14, 2015, 08:02		#5
gupta29505 Member freelancer.cae Join Date: Feb 2014 Location: USA Posts: 52 Rep Power: 12	Hi, I have 15 years of experience in applying CFD/FEA for wide range of industry - Automotive, Semiconductor, Comfort, Protection, Manufacturing, CFD software development. When I was in CFD software development/support company, I supported more than 100 commercial client in guiding/solving CFD problems. Please send me an email at freelancer.cfd@gmail.com and I can provide more details about my projects and we can discuss your project. Sincerely, Freelancer

February 10, 2015, 10:46		#6
strongrj13 Member Robert Strong Join Date: Feb 2015 Posts: 30 Rep Power: 11	Good morning, I would like more information about what you require. I have over 300 cases of experience in CFD and heat transfer analysis. Please email your requirements to robert.strong@strongsimulationconsulting.com. We work within any budgetary requirements. I would use ANSYS Fluent for the analysis.