Very small Matlab job: post-processing OpenFOAM (.CSV) results

RbBb · July 10, 2016, 15:56

I have what is probably a very small MATLAB job. I would like to make figures that compare results from OpenFOAM flow calculations with results from a second code. If this isn't the best place to be posting about a MATLAB job, I'd be very grateful if someone could point me in the right direction.

I already have a MATLAB code for plotting results from the second code. It allows me to create a separate plot for each time step in a flow calculation.

I want to be able to change the MATLAB code so I can put OpenFOAM results on each plot. The OpenFOAM results are in the form of .CSV files (I can output them from Paraview). There's a separate .CSV file for each time step.

To clarify, I know how to take one plot and add to it. What I'm looking for is a general code for dealing with any flow calculation (i.e., with an arbitrary number of time steps, etc). This is beyond my primitive MATLAB skills. I have to use MATLAB because the second code only generates MATLAB output. My budget is about 30 - 50 Euros.

Please feel free to ask any questions.

RbBb · July 11, 2016, 09:00

Someone has accepted this job, so it is now closed.

July 10, 2016, 15:56	Very small Matlab job: post-processing OpenFOAM (.CSV) results	#1
RbBb New Member Join Date: Apr 2014 Posts: 4 Rep Power: 11	I have what is probably a very small MATLAB job. I would like to make figures that compare results from OpenFOAM flow calculations with results from a second code. If this isn't the best place to be posting about a MATLAB job, I'd be very grateful if someone could point me in the right direction. I already have a MATLAB code for plotting results from the second code. It allows me to create a separate plot for each time step in a flow calculation. I want to be able to change the MATLAB code so I can put OpenFOAM results on each plot. The OpenFOAM results are in the form of .CSV files (I can output them from Paraview). There's a separate .CSV file for each time step. To clarify, I know how to take one plot and add to it. What I'm looking for is a general code for dealing with any flow calculation (i.e., with an arbitrary number of time steps, etc). This is beyond my primitive MATLAB skills. I have to use MATLAB because the second code only generates MATLAB output. My budget is about 30 - 50 Euros. Please feel free to ask any questions.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Very small job: converting an OpenFOAM mesh to a format needed by another code	SFr	CFD Freelancers	1	June 24, 2016 05:45
Suggestion for a new sub-forum at OpenFOAM's Forum	wyldckat	Site Help, Feedback & Discussions	20	October 28, 2014 09:04
Ansys Post processing	ano999	ANSYS	1	May 27, 2011 16:24
Post Processing in FEM	Abhijit Tilak	Main CFD Forum	0	April 26, 2004 11:59
Urgent help needed in post!!. processing results..	Deadly	FLUENT	0	August 21, 2002 00:42

July 11, 2016, 09:00		#2
RbBb New Member Join Date: Apr 2014 Posts: 4 Rep Power: 11	Someone has accepted this job, so it is now closed.