Mixing prediction - student's project.

jacooob · November 15, 2018, 03:29

Hello everyone,

I am doing a project at my University, and need some help.
With my friend we have provided real examination about the results of our topic. Now, I am going to compare them with the simulated results.

Topic: Simulation of the flow of fluid (with specified density) in a mixing tank. Rushton Turbine is used for making a motion.

I have already designed whole equipment, however I am not sure about the technique I've done it. Mixing tool, and the interior are completely meshed. I was trying to compile UDF file there to set a motion of a mixer, and here I was wondering if I do it properly.
There are too many ambiguities in my mind, which I think, can be solved.

Can you help me with this case? I need you to guide me through the whole process.
I know, it is an easy task, although I cannot find my mistakes and need some explanation.

Regards,
Jacob.

novakm · November 16, 2018, 08:09

Hi Jacob.

I think I can help.
Can you send me some of the details in a private message?

Thanks
Martin

November 15, 2018, 03:29	Mixing prediction - student's project.	#1
jacooob New Member Jakub Join Date: Oct 2018 Location: Cracow Posts: 1 Rep Power: 0	Hello everyone, I am doing a project at my University, and need some help. With my friend we have provided real examination about the results of our topic. Now, I am going to compare them with the simulated results. Topic: Simulation of the flow of fluid (with specified density) in a mixing tank. Rushton Turbine is used for making a motion. I have already designed whole equipment, however I am not sure about the technique I've done it. Mixing tool, and the interior are completely meshed. I was trying to compile UDF file there to set a motion of a mixer, and here I was wondering if I do it properly. There are too many ambiguities in my mind, which I think, can be solved. Can you help me with this case? I need you to guide me through the whole process. I know, it is an easy task, although I cannot find my mistakes and need some explanation. Regards, Jacob.

November 16, 2018, 08:09	Help	#2
novakm Member Martin Novák Join Date: Dec 2012 Location: Prague Posts: 70 Rep Power: 13	Hi Jacob. I think I can help. Can you send me some of the details in a private message? Thanks Martin

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CoCoons Project - Community-driven Documentation on OpenFOAM® Technology	holger_marschall	OpenFOAM Announcements from Other Sources	6	February 2, 2022 14:42
Inlet Mixing at 1D Numerical Model \| Stratified Storage	HumanistEngineer	Main CFD Forum	26	July 30, 2018 10:41
OpenFOAM v3.0+ ??	SBusch	OpenFOAM	22	December 26, 2016 14:24
Combination of multicomponent/multiphase for a mixing vessel	thomas_blunschi	CFX	3	July 1, 2015 07:27
CFD project idea	John Cleveland	Main CFD Forum	4	March 8, 2005 12:55