Differentially heated cavity using Star ccm+

MR Mecheng · June 14, 2019, 06:45

Hi,

I am looking for someone to help me with modelling and simulating buoyancy driven flows in a differentially heated square cavity. I will be using a RANS model and using the software star ccm+.

If anyone can help me with this simulation, it would be greatly appreciated. I can provide additional information to anyone interested in helping.

DJF · June 17, 2019, 07:35

Hi, I did a CFD study on Turbulent Natural Convection in an Air Filled Square Cavity in Star-CD. It is a benchmark test case based on experimental data. It contains a detailed description of the model and a comparisson of several turbulence models.

MR Mecheng · June 17, 2019, 07:40

Hi DJF,
would it be possible for you to share this with me. Hopefully I get an idea of how best to run the simulation.

Thanks

DJF · June 17, 2019, 08:35

What is the purpose of this study? are you willing to pay for the material?

abhiverma16 · June 21, 2019, 16:55

Hi MR Mecheng,

I can help you with that. I have been using StarCCM.

June 14, 2019, 06:45	Differentially heated cavity using Star ccm+	#1
MR Mecheng New Member Rizwan Join Date: Jun 2019 Posts: 3 Rep Power: 7	Hi, I am looking for someone to help me with modelling and simulating buoyancy driven flows in a differentially heated square cavity. I will be using a RANS model and using the software star ccm+. If anyone can help me with this simulation, it would be greatly appreciated. I can provide additional information to anyone interested in helping.

June 17, 2019, 07:35		#2
DJF New Member Join Date: Jan 2019 Posts: 12 Rep Power: 7	Hi, I did a CFD study on Turbulent Natural Convection in an Air Filled Square Cavity in Star-CD. It is a benchmark test case based on experimental data. It contains a detailed description of the model and a comparisson of several turbulence models. MR Mecheng likes this.

June 21, 2019, 16:55		#5
abhiverma16 New Member Abhishek Verma Join Date: Jan 2014 Posts: 7 Rep Power: 12	Hi MR Mecheng, I can help you with that. I have been using StarCCM. Last edited by abhiverma16; July 9, 2019 at 02:48. Reason: .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2D differentially heated cavity, which is appropriate solver?	vetnav	OpenFOAM	12	July 6, 2017 05:49
Compressible solver for differentially heated cavity	design_amrita	Main CFD Forum	0	January 15, 2013 07:28
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 04:04
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 04:38
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 04:15

June 17, 2019, 07:40		#3
MR Mecheng New Member Rizwan Join Date: Jun 2019 Posts: 3 Rep Power: 7	Hi DJF, would it be possible for you to share this with me. Hopefully I get an idea of how best to run the simulation. Thanks

June 17, 2019, 08:35		#4
DJF New Member Join Date: Jan 2019 Posts: 12 Rep Power: 7	What is the purpose of this study? are you willing to pay for the material?