Searching for a FEA lattice specialist

MichaelFF · May 27, 2021, 05:57

Hi All,
first thread on here.
Even though those are CFD forums, there is some overlap with FEA, so I hope this will not get rejected.

I'm looking for an FEA specialist or ideally a company.
to model a dense lattice product for an AM application. (the geometry is supplied by myself)
the budget is in the low KUSD, but scalable depending on the professionality of the company.

If this is not the right place, I hope to get recommendations for other avenues of search. and if it is, I'm happy to get in touch with freelancers.

Thanks!

MekTek · June 8, 2021, 14:43

Hi Michael,

I have over 8 years of experience with using FEA for structural analysis and machine design optimisation as well as CFD using ANSYS workbench.

Over the years, I have worked on more than twenty projects involving structural analysis with a goal of product development and design optimization for several clients globally across various verticals.

Delivering high quality of work on new product development has helped me build long standing relations with my clients.

Looking forward to discuss your requirements.

Thanks and Regards,
Venkat
+918300925460
turbinartek@gmail.com

You can view my profile on Guru here

May 27, 2021, 05:57	Searching for a FEA lattice specialist	#1
MichaelFF New Member Mich Join Date: May 2021 Posts: 1 Rep Power: 0	Hi All, first thread on here. Even though those are CFD forums, there is some overlap with FEA, so I hope this will not get rejected. I'm looking for an FEA specialist or ideally a company. to model a dense lattice product for an AM application. (the geometry is supplied by myself) the budget is in the low KUSD, but scalable depending on the professionality of the company. If this is not the right place, I hope to get recommendations for other avenues of search. and if it is, I'm happy to get in touch with freelancers. Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for someone to introduce an open source FEA program to my company	alpalpalp	CFD Freelancers	0	March 2, 2021 01:59
Lattice Structure Wind Load – STAR-CCM+	Fluidy	STAR-CCM+	1	May 17, 2020 13:33
Doxygen documentation	Tanay	OpenFOAM Installation	9	September 23, 2011 11:40
FEA s/w or FEA forums	Prashant	Main CFD Forum	7	December 7, 2003 09:42
Navier stokes compresible viscid flow fea, somebody can help?	Jose Choy	Main CFD Forum	3	October 24, 2003 02:28

June 8, 2021, 14:43		#2
MekTek New Member Venkat Join Date: Apr 2019 Location: Bengaluru Posts: 7 Rep Power: 7	Hi Michael, I have over 8 years of experience with using FEA for structural analysis and machine design optimisation as well as CFD using ANSYS workbench. Over the years, I have worked on more than twenty projects involving structural analysis with a goal of product development and design optimization for several clients globally across various verticals. Delivering high quality of work on new product development has helped me build long standing relations with my clients. Looking forward to discuss your requirements. Thanks and Regards, Venkat +918300925460 turbinartek@gmail.com You can view my profile on Guru here