|
[Sponsors] |
Questions about rotate immersed solid and mesh deformation |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 15, 2013, 10:57 |
Questions about rotate immersed solid and mesh deformation
|
#1 |
New Member
Jingyao Wang
Join Date: Jun 2013
Posts: 29
Rep Power: 12 |
Hi, I知 trying to simulate water splash in box baused by gear rotating. I知 new to CFX and I have tried several times, but the results turn out that the water volume fraction is no right., so I will be appreciated for your help.
(1) I read the CFX help document, I noticed that the immersed solid would not interact properly with mutiphase fluid. Since I concerned about the water and airdistribution caused by rotating gear, does the help document means I cannot use immersed solid for my simulation? (2) I try a gear in a box model and the simulation result seems correct. But I did not define mesh deformation, I知 wondering wether or not the meshdeformation must be defined in situation like mine, I suppose the mesh deformation is required, but how to explain my successful simulatin in the first time. P.S. English is not my native language, so I may understand and express mistakely , so please corret me if I made some mistake. Thank you very much! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Two-sided Wall Heat Transfer BC - No Separate Solid Mesh and No Heat Transfer Coeff | swahono | OpenFOAM Running, Solving & CFD | 10 | October 15, 2018 05:43 |
Flow over a flat plate as an immersed solid | hamed.majeed | CFX | 4 | September 8, 2016 14:40 |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
Update of the variables after dynamic mesh motion. | gtg258f | OpenFOAM Programming & Development | 9 | January 18, 2014 10:08 |
Error finding variable "THERMX" | sunilpatil | CFX | 8 | April 26, 2013 07:00 |