Transient thermal flux in CFX pre

YuguiYo · May 24, 2016, 05:23

Hi everyone,

I would like to know how can I define a transient (volume) thermal flow (W/m3) outgoing from a solid in CFX pre.

For now, i'm doing a subdomain to my solid where I set the energy source, but I can not add a data table as in 'thermal transient' system.

I've seen that I can set variables and expression for that energy source, but i don't know how to write my energy expression.

(The thermal flow that I should create is a like a squared signal : the period is 2 sec (0.5 Hz), max = 4.7e12 W/m3; and min = 0)

Would anyone like to help me ?

Thanks

ghorrocks · May 24, 2016, 06:31

So is your question how to apply the source term to give your thermal flow? Or is it how to link it to workbench so you can use the parametric stuff to control it?

YuguiYo · May 24, 2016, 08:22

Hi Ghorrocks,

I just want to apply a transient thermal flow to my solid in CFX pre by any way possible.

ghorrocks · May 24, 2016, 20:04

Apply a thermal boundary condition, or a thermal source term or even an initial condition. There are lots of methods available.

May 24, 2016, 05:23	Transient thermal flux in CFX pre	#1
YuguiYo New Member Hugo Regina Join Date: Apr 2016 Posts: 23 Rep Power: 10	Hi everyone, I would like to know how can I define a transient (volume) thermal flow (W/m3) outgoing from a solid in CFX pre. For now, i'm doing a subdomain to my solid where I set the energy source, but I can not add a data table as in 'thermal transient' system. I've seen that I can set variables and expression for that energy source, but i don't know how to write my energy expression. (The thermal flow that I should create is a like a squared signal : the period is 2 sec (0.5 Hz), max = 4.7e12 W/m3; and min = 0) Would anyone like to help me ? Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX Pre & Post Startup Error	vigges	CFX	12	March 17, 2023 03:30
FSI Transient Thermal Analysis	Abduri	CFX	1	January 1, 2017 22:54
Udf for moving heat flux in 2D cylindrical geometry	devia21	Fluent UDF and Scheme Programming	0	April 20, 2015 00:27
Transient Structural Coupleی CFX transient Pressure	sajad_ENG	Structural Mechanics	0	December 7, 2013 14:28
Transient animation performance in CFX 5.5 POST	Sjoerd Romkes	CFX	8	February 5, 2013 14:53

May 24, 2016, 06:31		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	So is your question how to apply the source term to give your thermal flow? Or is it how to link it to workbench so you can use the parametric stuff to control it?

May 24, 2016, 08:22		#3
YuguiYo New Member Hugo Regina Join Date: Apr 2016 Posts: 23 Rep Power: 10	Hi Ghorrocks, I just want to apply a transient thermal flow to my solid in CFX pre by any way possible.

May 24, 2016, 20:04		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Apply a thermal boundary condition, or a thermal source term or even an initial condition. There are lots of methods available.