Ansys 14.5 Problem Import Mesh from ICEM CFD to CFX

Smiling Assassin · May 4, 2014, 03:54

HI folks,
I am beginner to ANSYS ,
I am using Ansys 14.5 and I am having problem with importing mesh in CFX,
I have tried doing Output Solve-> Ansys CFx .... then save mesh as -> selected save as type "all files" ---> named file filename.cfx but it still saved as filename.cfx.uns .......... kindly guide me through... i have searched this forum and tried the solution but failed to do so

Bazinga · May 9, 2014, 02:27

Hey,

I have an older version but for me it is:
Output: Choose Output solver: Ansys CFX
Common Structural Solver: Ansys

Afterwards use write input and you should be able to create a .cfx5 file which can be importet in cfx-pre as a mesh. Note that .cfx files are pre-processor files and .cfx5 are the mesh files.

May 4, 2014, 03:54	Ansys 14.5 Problem Import Mesh from ICEM CFD to CFX	#1
Smiling Assassin New Member Hamza Abdullah Khan Join Date: May 2014 Posts: 1 Rep Power: 0	HI folks, I am beginner to ANSYS , I am using Ansys 14.5 and I am having problem with importing mesh in CFX, I have tried doing Output Solve-> Ansys CFx .... then save mesh as -> selected save as type "all files" ---> named file filename.cfx but it still saved as filename.cfx.uns .......... kindly guide me through... i have searched this forum and tried the solution but failed to do so

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How I could import Ansys mesh into CFX?	mahdi57	ANSYS Meshing & Geometry	8	August 9, 2013 04:49
Region Problem with ansys 12 icem mesh for cfx	compizer	CFX	0	May 5, 2010 03:02
How to import CFX mesh & result to ANSYS Structure	Ton	CFX	2	May 19, 2009 21:54
CFX mesh import from ICEM (Windows)	Andrew	CFX	7	July 6, 2006 11:39
ICEM CFD 5.1 Hex-Tet mesh merging failure	bogesz	CFX	1	January 29, 2005 06:46

May 9, 2014, 02:27		#2
Bazinga Senior Member Join Date: Jun 2012 Location: Germany, Bochum Posts: 230 Rep Power: 16	Hey, I have an older version but for me it is: Output: Choose Output solver: Ansys CFX Common Structural Solver: Ansys Afterwards use write input and you should be able to create a .cfx5 file which can be importet in cfx-pre as a mesh. Note that .cfx files are pre-processor files and .cfx5 are the mesh files.