simulation a Column with two countercurrent immiscible liquid

ahmad.momeni · June 20, 2015, 09:51

hi all.
I am a Beginner cfx user.I want to simulat a column that have two inlet and two outlet in up and downsid.liquids are kerosene and water. kerosene (dispersed phase) inject from down column and water (continues phase) inject from up.
taken k-e turbulence model for continues phase.
column diameter is (5 cm) and have (3.45 m) height.
used Ansys cfx 14.5
When solution after 1500 time step linear solution was falsed.
how i set solver parameters?

plz help me

ghorrocks · June 21, 2015, 06:31

FAQ: http://www.cfd-online.com/Wiki/Ansys...do_about_it.3F

ahmad.momeni · June 21, 2015, 16:05

Quote:

Originally Posted by ghorrocks

FAQ: http://www.cfd-online.com/Wiki/Ansys...do_about_it.3F

thank you ghorrocks but i do not get my answer. can you mor explain for me?

ghorrocks · June 21, 2015, 18:50

A vague question gets a vague answer.

If you post some details about what you are doing and what you are seeing we might have a chance of helping you.

June 20, 2015, 09:51	simulation a Column with two countercurrent immiscible liquid	#1
ahmad.momeni New Member Ahmad Momeni Join Date: Jun 2015 Posts: 4 Rep Power: 10	hi all. I am a Beginner cfx user.I want to simulat a column that have two inlet and two outlet in up and downsid.liquids are kerosene and water. kerosene (dispersed phase) inject from down column and water (continues phase) inject from up. taken k-e turbulence model for continues phase. column diameter is (5 cm) and have (3.45 m) height. used Ansys cfx 14.5 When solution after 1500 time step linear solution was falsed. how i set solver parameters? plz help me

June 21, 2015, 06:31		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	FAQ: http://www.cfd-online.com/Wiki/Ansys...do_about_it.3F ahmad.momeni likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solid Liquid Simulation FLuent	sandisk	FLUENT	3	November 9, 2017 01:11
Problem: bubble column with twoPhaseEulerFoam	hester	OpenFOAM Running, Solving & CFD	6	January 22, 2016 12:25
Liquid Evaporation Model Error in OF 2.3.0	brbbhatti	OpenFOAM	11	June 16, 2014 09:40
Liquid vaporized~(software simulation)	lenson	Main CFD Forum	0	May 16, 2005 03:16
compressible liquid simulation	kaiser	Main CFD Forum	0	October 13, 2002 04:32

June 21, 2015, 18:50		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	A vague question gets a vague answer. If you post some details about what you are doing and what you are seeing we might have a chance of helping you.