Regarding adding a new material

Priyanka Konakandla · October 16, 2015, 11:16

I am completely new to cfx. I should add a composition of UO2+ZrO2 . I tried replacing the properties of some other material with this composite but I could not match the properties.
The properties are
1. Composition
2.liquidus temperature
3.Solidus temperature
4.Density
5.Specific heat
5.Fusion heat
6.Surface tension
7.Thermal conductivity
8.liquid dynamic viscosity
9.emissivity

Actually it is a binary mixture and I am solving a multiphase flow

Thank you

chiragsvnit · October 16, 2015, 12:09

Did you check CFX tutorials of multiphase and including New materials?

Priyanka Konakandla · October 16, 2015, 12:12

I didn't find them
Please provide links of PDFs or videos

chiragsvnit · October 16, 2015, 12:51

In the CFX window: Help>CFX>Tutorials>Check Tutorial number 17.

Priyanka Konakandla · October 16, 2015, 12:53

Thank you sir

Priyanka Konakandla · October 20, 2015, 07:36

hello sir , i checked out the tutorials but there is no UO2 or ZrO2 material in the catlog

October 16, 2015, 11:16	Regarding adding a new material	#1
Priyanka Konakandla New Member Priyanka Join Date: Oct 2015 Posts: 14 Rep Power: 10	I am completely new to cfx. I should add a composition of UO2+ZrO2 . I tried replacing the properties of some other material with this composite but I could not match the properties. The properties are 1. Composition 2.liquidus temperature 3.Solidus temperature 4.Density 5.Specific heat 5.Fusion heat 6.Surface tension 7.Thermal conductivity 8.liquid dynamic viscosity 9.emissivity Actually it is a binary mixture and I am solving a multiphase flow Thank you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Setting the height of the stream in the free channel	kevinmccartin	CFX	12	October 13, 2022 21:43
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 05:21
Compression stoke is giving higher pressure than calculated	nickjuana	CFX	62	May 19, 2015 13:32
error message	cuteapathy	CFX	14	March 20, 2012 06:45
Two-Phase Buoyant Flow Issue	Miguel Baritto	CFX	4	August 31, 2006 12:02

October 16, 2015, 12:09		#2
chiragsvnit New Member Chirag Trivedi Join Date: Sep 2009 Location: Norway Posts: 26 Rep Power: 16	Did you check CFX tutorials of multiphase and including New materials?

October 16, 2015, 12:12		#3
Priyanka Konakandla New Member Priyanka Join Date: Oct 2015 Posts: 14 Rep Power: 10	I didn't find them Please provide links of PDFs or videos

October 16, 2015, 12:51		#4
chiragsvnit New Member Chirag Trivedi Join Date: Sep 2009 Location: Norway Posts: 26 Rep Power: 16	In the CFX window: Help>CFX>Tutorials>Check Tutorial number 17.

October 16, 2015, 12:53		#5
Priyanka Konakandla New Member Priyanka Join Date: Oct 2015 Posts: 14 Rep Power: 10	Thank you sir

October 20, 2015, 07:36		#6
Priyanka Konakandla New Member Priyanka Join Date: Oct 2015 Posts: 14 Rep Power: 10	hello sir , i checked out the tutorials but there is no UO2 or ZrO2 material in the catlog