|
[Sponsors] |
Turbulence model under laminar conditions |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 13, 2017, 12:56 |
Turbulence model under laminar conditions
|
#1 |
New Member
Michael
Join Date: May 2017
Posts: 12
Rep Power: 9 |
Hi all,
I am running a thin film hydrodynamic bearing model and am having some issues with the turbulence model. When you include a turbulence model under laminar conditions, should the results be equal to that of the case with no turbulence model. Thanks |
|
Tags |
laminar flow, turbulence model |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
Radiation in semi-transparent media with surface-to-surface model? | mpeppels | CFX | 11 | August 22, 2019 07:30 |
K - epsilon VS SST turbulence model | Maicol | Main CFD Forum | 0 | November 30, 2012 16:25 |
Wrong calculation of nut in the kOmegaSST turbulence model | FelixL | OpenFOAM Bugs | 27 | March 27, 2012 09:02 |
Boundary conditions for Spalart-Allmaras Turbulence model | dn.srinath | Main CFD Forum | 1 | November 13, 2010 22:57 |