|
[Sponsors] |
Multiblock grid, interface Boundary condition |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 5, 2002, 07:14 |
Multiblock grid, interface Boundary condition
|
#1 |
Guest
Posts: n/a
|
Hello,
I am trying to model an axisymmetric supersonic jet impinging onto a flat plate placed 5 nozzle diameters from exit of the supersonic nozzle. The model is a 5 degree sector of a cylinder. The grid consists of three blocks, one for the jet, one for the interaction with the plate and one for the farfield region as the jet diffuses after impacting with the plate. What is the boundary condition to specify for the grid interface between the different blocks to ensure that symmetry BC's are not placed at the interface? regards Nandu |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
specifying interface boundary condition | cprasad111 | CFX | 7 | June 1, 2011 18:24 |
External Radiation Boundary Condition (Two sided wall), Grid Interface | CFD XUE | FLUENT | 0 | July 8, 2010 06:49 |
Problem with Interface Boundary Condition | tos | FLUENT | 0 | April 4, 2010 08:11 |
The Boundary Condition about the Flat Plate | boing | Main CFD Forum | 1 | January 6, 2002 16:53 |
Block interface boundary conditions for multiblock | Hyun, Ko | Main CFD Forum | 1 | December 14, 2000 10:08 |