CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Newtonian Fluids

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 16, 2018, 12:13
Default Newtonian Fluids
  #1
New Member
 
Join Date: Feb 2018
Posts: 2
Rep Power: 0
ZEUS is on a distinguished road
I'm analyzing the operation of a pump, when the fluid changes.

Can you tell me if the following fluids are Newtonians?

The fluids are:
R245fa
R134a
R152a
R141b
R142b
Benzene (C6H6)
Toluene (C7H8)
Acetone (C3H6O)

Thank you
ZEUS is offline   Reply With Quote

Old   July 16, 2018, 18:34
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,703
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
All fluids are non-Newtonian if measured with sufficient accuracy and to extreme enough conditions. The question you should be asking is whether in my application the non-Newtonian properties are significant or not. We cannot answer that as that depends on what you are trying to do and what you wish to learn from the simulation.
__________________
Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.
ghorrocks is offline   Reply With Quote

Old   July 17, 2018, 03:02
Arrow
  #3
New Member
 
Join Date: Feb 2018
Posts: 2
Rep Power: 0
ZEUS is on a distinguished road
I'm analyzing the performance of a centrifugal pump that has a rotation speed of 2900 [rev min ^ -1].
the pump is designed to work with water, which at the inlet is in the condition of saturated liquid with a temperature of 30 ° C.

I want to know the trend of the hydraulic head according to the flow rate, varying the fluid.

In the simulations with water and other fluids, I considered the properties of each fluid (viscosity, specific heat, etc ...) constant and associated with the saturated liquid condition at a temperature of 30 ° C.

For each simulation I have set as input condition the pressure associated with the saturated liquid condition at the temperature of 30 ° C, while I set the flow rate as an output condition.

My doubt is if these settings are correct, especially if it is correct to consider the constant viscosity as if the fluid is Newtonian.

Thank you.
ZEUS is offline   Reply With Quote

Old   July 17, 2018, 03:17
Default
  #4
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,703
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
You really should go to the literature and determine for yourself whether these fluids are non-Newtonian in the application you have.

But in my experience I think you will find that most pure substances (ie liquids of a single molecule) are Newtonian for most applications. You will find viscosity and density variations due to temperature and pressure are likely to be much bigger than any non-Newtonian properties for these fluids.

The big exception is if any of these fluids cavitate, boil, freeze or other multiphase effects occur then this will be seen as strong non-Newtonian properties - but it would be better described as multiphase properties (eg wet steam).
__________________
Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.
ghorrocks is offline   Reply With Quote

Reply

Tags
newtonian fluid


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Non Newtonian fluids: gravity or no gravity ? MjG Main CFD Forum 5 April 1, 2018 13:28
Non- Newtonian fluids Iman Sengupta FLUENT 0 June 30, 2015 09:27
Multiphase and Non Newtonian fluid wanna88 FLUENT 0 May 27, 2013 00:09
Low reynolds model for non newtonian fluids Kimo FLUENT 0 July 22, 2007 11:36
spraying non newtonian fluids IƱigo Main CFD Forum 0 October 4, 2005 09:36


All times are GMT -4. The time now is 12:23.