|
[Sponsors] |
March 2, 2006, 11:04 |
Mesh adaption
|
#1 |
Guest
Posts: n/a
|
Hi, All
When the mesh adaption is used, is it possible to show the mesh at different adaption steps(or time steps)? Best regards! Andy |
|
March 2, 2006, 11:39 |
Re: Mesh adaption
|
#2 |
Guest
Posts: n/a
|
Dear Andy,
Under Mesh Adaption, select the option Save Intermediate Files, and later on you can visualize independent files using CFX-Post.. Good luck, Opaque |
|
March 2, 2006, 12:20 |
Re: Mesh adaption
|
#3 |
Guest
Posts: n/a
|
Thank you, Opaque.
another question: Can I export the final mesh (after final adaption step) for future use? Best regards! Andy |
|
March 2, 2006, 14:07 |
Re: Mesh adaption
|
#4 |
Guest
Posts: n/a
|
Dear Andy,
Those intermediate files are just plain results files. You can use them with the cfxexport (if that is what you meant), or import the meshes from them in CFX-Pre to create a new case. Good luck Opaque |
|
March 2, 2006, 16:44 |
Re: Mesh adaption
|
#5 |
Guest
Posts: n/a
|
Thanks, opaque.
Best regards! Andy |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 03:19 |
[ICEM] Negative volume error in hybrid mesh | siw | ANSYS Meshing & Geometry | 4 | September 3, 2014 05:25 |
Unstructured Mesh using Mesh adaption | sidzishere | CFX | 1 | May 31, 2011 10:18 |
Mesh adaption | anand | FLUENT | 0 | February 10, 2009 00:07 |
Convergence moving mesh | lr103476 | OpenFOAM Running, Solving & CFD | 30 | November 19, 2007 14:09 |