|
[Sponsors] |
March 17, 2006, 05:34 |
correct assignment of permeability?
|
#1 |
Guest
Posts: n/a
|
hi all,
for each of my element, the permeability in the X and Y directions are the same and in the Z direction it is different. i would like to check if my permeability assignmnet is correct. flow is coming in along the X,Y directions....so streamwise permeability is the permeability of the XY direction and transverse permeability is in the Z direction? so streamwise assignmnet is X=1 , Y=1 and Z=0? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
How to choose or find Permeability for a Porous screen model using darcy's law.... | arunraj | CFX | 4 | September 27, 2011 00:20 |
Permeability for porous body | M_Flodin | FLUENT | 3 | February 22, 2011 08:16 |
how to assign directional permeability? | jemteo | CFX | 0 | April 15, 2006 23:56 |
PEMFC and Permeability | Sumon | Siemens | 1 | November 15, 2005 19:22 |