CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > CFX

correct assignment of permeability?

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   March 17, 2006, 05:34
Default correct assignment of permeability?
Posts: n/a
hi all,

for each of my element, the permeability in the X and Y directions are the same and in the Z direction it is different. i would like to check if my permeability assignmnet is correct.

flow is coming in along the X,Y streamwise permeability is the permeability of the XY direction and transverse permeability is in the Z direction?

so streamwise assignmnet is X=1 , Y=1 and Z=0?

  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
How to choose or find Permeability for a Porous screen model using darcy's law.... arunraj CFX 4 September 27, 2011 00:20
Permeability for porous body M_Flodin FLUENT 3 February 22, 2011 08:16
how to assign directional permeability? jemteo CFX 0 April 15, 2006 23:56
PEMFC and Permeability Sumon Siemens 1 November 15, 2005 19:22

All times are GMT -4. The time now is 14:40.