CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > CFX

heat transfer: air in a room and water in a coil

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   April 8, 2006, 07:12
Default heat transfer: air in a room and water in a coil
Posts: n/a
Good morning to all, I have some problems with heat transfer. I have a small room with hot air inside (the heat flux is produced by viscous friction between air and a disk rotating inside the room with a fixed angular velocity); in this room there is a coil in which cool water enters with a fixed velocity and temperature at the inlet. I need to know the air temperature inside the room at the equilibrium and the temperature of water at the outlet of coil. I have also to consider the heat dissipation through the room walls (knowing the temperature outside the room and their material).

Can anyone show me a guide line for the solution of this problem?

The copper coil is very thin (1mm), is it necessary to make the mesh of the thickness creating a solid domain?

Many many thanks.

  Reply With Quote

Old   April 8, 2006, 07:51
Default Re: heat transfer: air in a room and water in a co *NM*
Posts: n/a
  Reply With Quote

Old   May 9, 2006, 09:56
Default Re: heat transfer: air in a room and water in a co
haddad fatah
Posts: n/a
boon jour j'aimerai avoire des rensignements sur la similation d'une salle d'opération a laide de logiciel fluent merci d'avance monsieur
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Heat transfer from air to solid Tramph FLUENT 0 January 25, 2011 17:42
Heat Transfer Coeff on the water air interface Anton Main CFD Forum 3 June 2, 2010 01:49
Water into 3D room shangzung OpenFOAM 2 January 15, 2010 09:47
condensation of water vapour at room walls Felix FLUENT 0 September 14, 2007 11:03

All times are GMT -4. The time now is 20:30.