|
[Sponsors] |
June 17, 2006, 21:48 |
CFX 10 -pre and -post problams on Linux
|
#1 |
Guest
Posts: n/a
|
hi,guys! I have installed CFX 10 on Redhat Enterprise Linux 4 AS. But I got these error message when I started the CFX:
[root@localhost bin]# ./cfx5launch /usr/cfx10/CFX-10.0/bin/linux/PreGui_ogl.exe: /usr/cfx10/CFX-10.0/lib/linux/libg cc_s.so.1: version `GCC_3.3' not found (required by /usr/lib/libstdc++.so.6) Warning! CFX-PRE exited with return code 1 /usr/cfx10/CFX-10.0/bin/linux/PostGui_ogl.exe: /usr/cfx10/CFX-10.0/lib/linux/libgcc_s.so.1: version `GCC_3.3' not found (required by /usr/lib/libstdc++.so.6) Warning! CFX-POST exited with return code 1 Please tell me how to deal with the error. Thank you! |
|
June 19, 2006, 07:55 |
Re: CFX 10 -pre and -post problams on Linux
|
#2 |
Guest
Posts: n/a
|
Have you installed the correction arch version of CFX for the linux flavour you are using (e.g. 32 vs 64 bit, IA64 vs AMD64)?
|
|
June 19, 2006, 16:04 |
Re: CFX 10 -pre and -post problams on Linux
|
#3 |
Guest
Posts: n/a
|
Henry, it looks like you've installed the 32-bit version. If that is indeed the correct version for your hardware, then set:
LD_PRELOAD=/lib/libgcc_s.so.1 to get it to work. Mike |
|
June 22, 2006, 07:57 |
Re: CFX 10 -pre and -post problams on Linux
|
#4 |
Guest
Posts: n/a
|
Thank you
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ansys 13 CFX problem on LInux Opensuse 11.4 | serendipity | CFX | 10 | August 7, 2012 04:24 |
different CFX Pre and Post mesh region | mactech001 | CFX | 9 | April 11, 2010 22:08 |
chart for transiente simulation - CFX Post | rogbrito | CFX | 0 | June 22, 2009 13:12 |
No display on CFX Pre and Post | Dipl.-Ing. Jayadi Lukito | CFX | 0 | May 23, 2007 10:30 |
(CFX POST) Rotational Speed | ARJUN | CFX | 9 | July 13, 2006 21:38 |