|
[Sponsors] |
February 20, 2007, 03:25 |
Reg: Modeling hub leakage flow in CFX
|
#1 |
Guest
Posts: n/a
|
Hi,
If anyone has modelled hub leakage flow for an multistage axial compressor in CFX. We are generating the grid in Turbogrid. Turbogrid doesn't allow a patch surface to be created on the hub. The way that it can be done is to take the Turbo grid mesh into ICEM and create a patch surface in ICEM. Instead if there is anyother mehtod to avoid this incorporate this in CFX please let me know. It would be of great help. Thanks Venkat |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Multiphase flow modeling: CFX or FLUENT? | Paul | Main CFD Forum | 8 | January 24, 2012 09:25 |
CFX mass flow boundary condition | Michele Cagna | CFX | 3 | February 22, 2007 15:52 |
CFD Modeling of Two-phase Flow in Small Dia.Tubes | Eric Poindexter | Main CFD Forum | 2 | September 22, 2000 09:21 |
fluid flow fundas | ram | Main CFD Forum | 5 | June 17, 2000 21:31 |
Hydrostatic pressure in 2-phase flow modeling (long) | DS & HB | Main CFD Forum | 0 | January 8, 2000 15:00 |