CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

how to start using CCL

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By Norberto Marcelo Nigro

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 30, 2007, 15:47
Default how to start using CCL
  #1
Norberto Marcelo Nigro
Guest
 
Posts: n/a
I would like to know how can I start using CCL in CFX. I had never used it and I would like to enhance my understanding of this software tool.

If someone has some example using CCL please send me as a tutorial.

Thanks a lot
  Reply With Quote

Old   May 30, 2007, 17:08
Default Re: how to start using CCL
  #2
opaque
Guest
 
Posts: n/a
Dear Norberto,

Do you mean CEL as in CFX Expression Language, or CCL (CFX Command Language) ?

They are two different languages with different purposes..

Rarely anybody needs to know how CCL works, but just replacing values on the RHS of a parameter..

For CEL, there are quite a few examples in the tutorials.

Opaque.

  Reply With Quote

Old   May 30, 2007, 17:12
Default Re: how to start using CCL
  #3
Norberto Marcelo Nigro
Guest
 
Posts: n/a
Dear Opaque

thanks a lot. I really mean CCL because I would like to manage CFX Post processing in background mode, not using GUI interface.

Nevertheless I have no enough experience with CFX so probably I could missunderstand the purpose of CCL.

Thanks again

Take care

Norberto
  Reply With Quote

Old   May 31, 2007, 09:32
Default Re: how to start using CCL
  #4
opaque
Guest
 
Posts: n/a
Dear Norberto,

I am sorry.. My comment was solver centric.. Yes, CFX-Post relies heavily on CCL.

Did you read the section ANSYS CFX-Post User's Guide/CCL and CEL in ANSYS CFX-Post..?

Opaque

  Reply With Quote

Old   May 31, 2007, 12:16
Default Re: how to start using CCL
  #5
Norberto Marcelo Nigro
Guest
 
Posts: n/a
Dear Opaque

Yes, I read it but I did not find any example to clarify its usage. Do you have some example, tutorial or hands out using CCL ?

Thanks for your patience

Norberto
AntonZ likes this.
  Reply With Quote

Old   August 9, 2019, 05:06
Default
  #6
New Member
 
Gioacchino La Rochelle
Join Date: Jul 2016
Posts: 19
Rep Power: 10
Gioacchino La Rochelle is on a distinguished road
Finding on the forum I reached this post.

The necessity I have is the same.
I changed just the meshing (no Named selection or geometry), on CFX-pre did a new case, loaded the mesh and loaded CCL from previous simulation (configuration CFX-pre) but obtaining many errors!

What's the right procedure to use old CCL files? The ANSYS-guide reported here seems quite clear about it, but the long list of errors just changing the mesh seems to me unexpected.
Gioacchino La Rochelle is offline   Reply With Quote

Old   August 9, 2019, 06:36
Default
  #7
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,830
Rep Power: 144
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
If you change the meshing it has probably changed the name of the mesh blocks and boundary faces, which means all the definitions of domains and boundary conditions will be broken. It can be quite tedious to reconnect them all again. This is a good reason to use named selections for definitions in CFX-Pre so remeshing can be handled easily.
__________________
Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.
ghorrocks is offline   Reply With Quote

Old   August 9, 2019, 11:27
Default
  #8
New Member
 
Gioacchino La Rochelle
Join Date: Jul 2016
Posts: 19
Rep Power: 10
Gioacchino La Rochelle is on a distinguished road
I have used the same named selection for outer surfaces.
The domain hasn't changed their name remeshing on Ansys-mechanical.
Gioacchino La Rochelle is offline   Reply With Quote

Old   August 9, 2019, 21:09
Default
  #9
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,830
Rep Power: 144
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
OK, I was just guessing as you did not tell us anything about what errors you received or what you did. So if you want us to help you then you better give us some information to work with - what error messages are you getting, how have you set it up, what are you modelling?
__________________
Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.
ghorrocks is offline   Reply With Quote

Old   August 11, 2019, 07:04
Default
  #10
New Member
 
Gioacchino La Rochelle
Join Date: Jul 2016
Posts: 19
Rep Power: 10
Gioacchino La Rochelle is on a distinguished road
As soon as I'll get the same error (just refining the meshing and not changing geometry or named selections) I will report here the errors. It was a very large list.

Anyway my models include solid and fluid domains with flowing wet steam.
Gioacchino La Rochelle is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
TimeVaryingMappedFixedValue irishdave OpenFOAM Running, Solving & CFD 32 June 16, 2021 06:55
Problem in running ICEM grid in Openfoam Tarak OpenFOAM 6 September 9, 2011 17:51
Start star ccm+ remotely with mpiexec Dagnir Siemens 0 November 24, 2010 12:33
on the definition of Start in shell autoignition mepgzzi Siemens 0 June 18, 2008 10:33
Lets start the public domain CFD-Project! Heinz Wilkening Main CFD Forum 3 March 11, 1999 22:55


All times are GMT -4. The time now is 02:31.