 |
 |
 |
|
|
|
[Sponsors] | ||||
February 29, 2008, 05:01
|
convergence problem with high viscosity
|
#1 |
|
Guest
Posts: n/a
|
Dear all, I am working on simulation of gear motor. It's 2D steady state simulation. I had quite good results but now, when I increase the dynamic viscosity from 0.02 to 0.8 kg/m*s there are poor convergence problem. Next info about the model: material-oil, turbulence model-komega, advection scheme-upwind, time step-1e-4, intlet-static pressure, outlet-static pressure, taken the velocity of gears... I heard that higher value of the viscosity is better for convergence. Thanks a lot for answers and sorry for my english.
Jan |
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Continuity eq convergence problem | carno | FLUENT | 4 | February 8, 2008 05:04 |
| High turbulent viscosity, problem with BC | Narmin | FLUENT | 2 | May 8, 2007 04:17 |
| convergence problem | limseokmin | FLUENT | 3 | November 14, 2004 13:43 |
| Convergence Problem | Johnny B | FLUENT | 5 | November 4, 2003 17:01 |
| convergence problem | Trushar | Phoenics | 5 | August 28, 2002 00:40 |
Linear Mode
