|
[Sponsors] |
Radiation P1 Model with Spectral Model: Multigray |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 25, 2008, 13:44 |
Radiation P1 Model with Spectral Model: Multigray
|
#1 |
Guest
Posts: n/a
|
Dear All,
I have a "converged" solution from a combustion problem (without radiation) and tried to initialise a new calculation including radiation with the P1 model and Multigray as spectral model. The problem is that the calculation crashes after 2 iterations. For the initialisation of the radiation (Initialisation -> Radiation Intensity) I put a very small value for the initial radiation intensity. It semms that this value is not read and the temperature distribution of the converged combustion problem is used instead, which could cause the crash of the linear solver, because of the high combustion temperatues. Could somebody help me! Thanks. Andy |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Solar radiation model | Min | Siemens | 2 | August 31, 2018 09:04 |
P1 radiation model and 2D calculation | autumn1012 | OpenFOAM Running, Solving & CFD | 6 | November 11, 2009 03:52 |
help on radiation model for a moving laser beam | nazeem | FLUENT | 1 | April 20, 2009 11:34 |
radiation model | Emanuele De Bonis | FLUENT | 0 | February 12, 2007 12:10 |
Radiation Model - Spectral Model | Ray | CFX | 3 | April 10, 2006 10:33 |