|
[Sponsors] |
November 10, 2008, 00:41 |
spanwise-average contour in CFX-post??
|
#1 |
Guest
Posts: n/a
|
hello,everyone
I am doing a backward facing-step unteady simulation using CFX. How can I get the spanwise-averaged pressure contour in CFX-Post? Thanks inadavance. Regards, Lan |
|
November 10, 2008, 05:04 |
Re: spanwise-average contour in CFX-post??
|
#2 |
Guest
Posts: n/a
|
Hi Lan, you can simply initilise the domain in turbo mode, selecting the top and bottom walls as casing and hub respectively. You do not need to choose a blade. Then you can use the options in turbo mode. However, you may find that the region close to the step is not distributed as well as the other regions of the turbo mesh.
What do you mean by span? Same direction as the step height, or accross the domain? You can also export the results for each timestep and post process with say Matlab or Tecplot. Cheers Adam |
|
November 10, 2008, 21:33 |
Re: spanwise-average contour in CFX-post??
|
#3 |
Guest
Posts: n/a
|
Thanks,Adam.
My spanwise means the direction across the flow domain. I got your method in CFX-post. And how can I get the spanwise-averaged data in tecplot? Regards, Lan |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Transient animation performance in CFX 5.5 POST | Sjoerd Romkes | CFX | 8 | February 5, 2013 15:53 |
CFX Post export problem | jeff_F | CFX | 0 | August 17, 2009 22:25 |
Chart Generation in CFX Post | Vadim Baines-Jones | CFX | 2 | August 28, 2007 10:14 |
Export AreaAve data at each time step in CFX Post | Kumar | CFX | 2 | August 22, 2007 13:32 |
ANSYS CFX POST State file | Mechstud | CFX | 1 | June 22, 2007 15:59 |