problem in displaying surfaces in CFX

haho · July 5, 2009, 11:46

Hi together,

i've already postet this question in the meshing-forum.
My problem is that CFX Pre and Post are not displaying my surfaces of a 2D-axisymmetric labyrinth seal correctly (see pictures).
I am using ICEm as mesher and extracting he mesh as CFX-files.

I've already checked the surface-normals, but it seems as this didn't help.
Is this a usual problem in CFX, can anybody help me?

The Problem only appears when I'm coloring the surfaces with "constant" color.

Thanks,
Hannes

ghorrocks · July 5, 2009, 20:25

Hi,

I don't think you are using symmetry planes for the faces. You seem to be using periodic boundaries. Change them to symmetry planes and I think things will work.

Glenn Horrocks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX Convergence Problem	Abdul	CFX	12	June 30, 2014 09:55
Problem with CFX v10	lost2010	CFX	3	July 3, 2009 08:26
CFX 11 x64 solver? problem	Attesz	CFX	6	June 7, 2009 09:37
Can CFX deal with jet impinging problem?	prayskyer	CFX	1	September 4, 2006 18:04
CFX 5.6 memory problem with solver	sreevisakh	CFX	3	February 2, 2004 05:57

July 5, 2009, 20:25		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 18,017 Rep Power: 146	Hi, I don't think you are using symmetry planes for the faces. You seem to be using periodic boundaries. Change them to symmetry planes and I think things will work. Glenn Horrocks