[Roland R]

Hello CFX Users,

I have the next problem:
I am investigating a displacement of a body which is moved by the flow forces. (I have defined the deforming mesh option in my simulation.) I would like to limit the value of the body displacement with the stop of the simulation. The next time range (the next position of the body) will be defined with a new mesh, therefore the simulation should be stopped by all means. (The mesh deformation is too high so the mesh has to be changed.)

For example: I monitor the „Total Mesh Displacement Y” during the solver running. I would like to stop the solver when the Total Mesh Disp. reaches a certain value.

Thanks in advance;

Roland