|
[Sponsors] |
August 16, 2011, 18:03 |
Solar Updraft Tower
|
#1 |
New Member
Sandeep Patel
Join Date: Aug 2011
Posts: 3
Rep Power: 14 |
Hey..I am doing a research on solar updraft tower and i want to use ANSYS CFX to simulate the solar updraft tower. I am having problems with the boundary conditions.. For the inlet i have used the boundary type OPENING with a defined value of static pressure. The outlet i have used the boundary type OUTLET with static pressure as 0Pa.For the base, the collector wall and the chimney wall i have used the boundary type WALL with mass and momentum as free slip wall and heat transfer as adiabatic.. For the domain i have used air ideal gas with buoyancy model as buoyant and i have specified the gravity and the reference density as well as the reference location. for the heat transfer model i have used total energy and the turbulence model as laminar. i also have provided the value for insolation for the collector..Can someone help me with the boundary conditions for the Solar Updraft Tower...
|
|
Tags |
ansys cfx, boundary conditions, solar updraft tower |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Solar radiation model | Min | Siemens | 2 | August 31, 2018 08:04 |
Solar Panel Water heating using solidwork Flow Simulation | axtray | FloEFD, FloWorks & FloTHERM | 2 | September 21, 2011 15:47 |
solar heat flux through roof | Tim | FLUENT | 1 | January 17, 2007 16:01 |
solar radiation | Arnold | FLUENT | 0 | May 2, 2006 21:00 |
solar radiation | su nam | Siemens | 0 | July 30, 2004 02:17 |