two dimensional jet in cross-flow -- CFD Online Discussion Forums

June 23, 2006, 07:46	two dimensional jet in cross-flow	#1
Piet Guest Posts: n/a	Dear CFD-users, I am modelling a two dimensional jet in cross-flow configuration. Properties of water are used and it is modelled with the latest version of COMSOL Multyphisics. The velocity ratio Vjet/Vcf is 0.75. The full Navier-Stokes equation has to be solved. I have problems with the outflow boundary condition. I use a pressure = 0 condition. Also when I decrease the inflow velocity, problems appear. Does anybody have an idea how to solve the problem? Thanks for the comments in advance! Regards, Piet

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
unable to run dynamic mesh(6dof) and wave UDF	shedo	Fluent UDF and Scheme Programming	0	July 1, 2022 17:22
Intuition for why flow follows convex surfaces	lopp	Main CFD Forum	47	February 1, 2022 13:14
2 Phase Flow, Gas Jet into Water Simulation Method	im_lenny	OpenFOAM	3	May 4, 2017 03:20
Trajectory of particles in a jet in cross flow	forgottenman	FLUENT	0	November 29, 2011 02:43
Slot jet in cross flow.	Hamdy	FLUENT	0	March 5, 2006 04:04

All times are GMT -4. The time now is 01:25.