|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Join Date: Apr 2023
Posts: 1
Rep Power: 0 ![]() |
Hi,
I wanted to use biodiesel as fuel, and I chose MD as a chemical substitute. And the mechanism and thermodynamics files of MD were imported, and now the physical properties of MD in parcel simulation are not very consistent with the physical properties of biodiesel, can I replace the physical properties of MD with the physical properties of other substances (substances not in the mechanism file)? What do I need to do? Thanks for your help. |
|
![]() |
![]() |
![]() |
![]() |
#2 |
New Member
Achyuth Rajendran
Join Date: May 2022
Location: Madison, WI, USA
Posts: 13
Rep Power: 4 ![]() |
Hi,
You can replace the physical properties of MD with something that is more consistent to that of the biodiesel. If you need further help in doing this, please reach out to us at support@convergecfd.com |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Using results from simulation A in simulation B | Hafssa | FLUENT | 2 | October 9, 2022 03:19 |
"DDPM"; "dense gas-solid flow" Question About Particle Number in Parcel | hcs129 | FLUENT | 3 | April 22, 2022 04:53 |
DPMFoam - Serious Error --particle-laden flow in simple geometric config | benz25 | OpenFOAM Running, Solving & CFD | 27 | December 19, 2017 20:47 |
Surface Source - Fixed Temperature? | robtheslob | FloEFD, FloWorks & FloTHERM | 18 | May 12, 2017 02:28 |
BrownianMotionForce in "reactingParcelFoam". parcel escaped from inlet and diverged. | bijan darbari | OpenFOAM Running, Solving & CFD | 7 | June 7, 2016 02:47 |