|
[Sponsors] |
April 30, 2024, 23:02 |
Wall Temperature Boundary Condition
|
#1 |
New Member
T.Kim
Join Date: Sep 2019
Posts: 1
Rep Power: 0 |
In Converge, when you set the wall model (heat transfer model) for each boundary, you can choose 'global'.
And you can specify it later in turbulence setup to which model will be a global model for all boundaries (Han and Reitz, Angelberger, etc.) But I don't really see any description about temperature wall model from Jayatilleke(even in the manual, Im using v3.1), but you can choose it in turbulence setup, while you cannot choose in boundary setup. So my question is, if I set all boundaries' heat model as 'global', and choose Jayatilleke in turbulence setup, which model Converge will solve for the temperature wall function? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PEMFC tutorial case problem | Suleyman41 | FLUENT | 2 | July 15, 2023 11:16 |
decomposePar problem: Cell 0contains face labels out of range | vaina74 | OpenFOAM Pre-Processing | 37 | July 20, 2020 05:38 |
Basic Nozzle-Expander Design | karmavatar | CFX | 20 | March 20, 2016 08:44 |
Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 06:20 |
Question about heat transfer coefficient setting for CFX | Anna Tian | CFX | 1 | June 16, 2013 06:28 |