Project Tree Management

-mAx- · October 19, 2015, 07:08

Hello,
I have a question since a while, but always forgot to ask.

Let say I have an assembly (Creo environment), with a housing and a piston.
I run a first case with 1mm stroke

Now I want to compare the result with 2mm stroke.
So I create a new project, and I set the stroke with 2 mm. (I don't want to use the parameter tool)
I run the case.

Then I activate the first case with 1mm, and I see that the stroke is 2mm.

Is there a way to manage this kind of situation?

Thank you

Boris_M · October 29, 2015, 10:15

Yes, you have to use the design table of Creo if you don't want to use the parametric Study.
This is in every CAD version as FloEFD always uses the CAD model as it is for the simulation except if the simulation project is referenced to a specific CAD model configuration such as in a design table defined. I think in Creo they are called Family table, in Catia they are called Design Table and for NX I honestly don't know but probably similar :-)

Boris

-mAx- · October 30, 2015, 01:17

I always forget to use this design table
have to be less lazy

October 19, 2015, 07:08	Project Tree Management	#1
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	Hello, I have a question since a while, but always forgot to ask. Let say I have an assembly (Creo environment), with a housing and a piston. I run a first case with 1mm stroke Now I want to compare the result with 2mm stroke. So I create a new project, and I set the stroke with 2 mm. (I don't want to use the parameter tool) I run the case. Then I activate the first case with 1mm, and I see that the stroke is 2mm. Is there a way to manage this kind of situation? Thank you __________________ In memory of my friend Hervé: CFD engineer & freerider

October 29, 2015, 10:15		#2
Boris_M Disabled Join Date: Jul 2009 Posts: 616 Rep Power: 23	Yes, you have to use the design table of Creo if you don't want to use the parametric Study. This is in every CAD version as FloEFD always uses the CAD model as it is for the simulation except if the simulation project is referenced to a specific CAD model configuration such as in a design table defined. I think in Creo they are called Family table, in Catia they are called Design Table and for NX I honestly don't know but probably similar :-) Boris -mAx- likes this.

October 30, 2015, 01:17		#3
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	I always forget to use this design table have to be less lazy __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CoCoons Project - Community-driven Documentation on OpenFOAM® Technology	holger_marschall	OpenFOAM Announcements from Other Sources	6	February 2, 2022 14:42
The FOAM Documentation Project - SHUT-DOWN	holger_marschall	OpenFOAM	242	March 7, 2013 12:30
"Sharing Violation on path...*wbpj" project gone	MainzerKaiser	ANSYS	0	February 23, 2012 04:59
Extend Project Release 1.6-ext	hjasak	OpenFOAM Announcements from Other Sources	33	July 14, 2011 18:54
CFD project idea	John Cleveland	Main CFD Forum	4	March 8, 2005 12:55