|
[Sponsors] |
Assistance with cfd ( solidworks flow) of small water pump |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 5, 2017, 16:12 |
Assistance with cfd ( solidworks flow) of small water pump
|
#1 |
New Member
kliff Latchman
Join Date: Apr 2017
Posts: 9
Rep Power: 9 |
i am conducting cfd of a small submersible water pump (Model Resun king-2) in attempt to improve performance(flow rate, reliability) of the impeller. i have modeled the original pump on solidworks. currently i am trying to validate the model against the real pump. the pumps speed is fixed at 3000rpm nothing can be varied on the pump.. the pump currently operates at the bottom of a 3ft pond and is used for re circulation. i very the depth at which the pump operates to see how it affects flow and head..from conducting the real experiments, my cfd model produces somewhat accurate flow but not head.,, boundary condition used at the intlet is static pressure of atm + 3ft depth and at outlet discharge piping is only atmospheric pressure. can someone help me? i can provide all that i have done so far.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mass imbalance problem in multiphase water and steam CFX case | Antech | CFX | 1 | October 26, 2020 04:03 |
Multiphase flow - incorrect velocity on inlet | Mike_Tom | CFX | 6 | September 29, 2016 01:27 |
ANSYS 15 CFD or Solidworks flow simulation | William_T | Main CFD Forum | 1 | October 30, 2014 03:41 |
How to sumilate water flow of a river in a tunnel using Autocad CFD | Ashkar | Main CFD Forum | 0 | August 8, 2014 08:12 |
CFD simulation of mixed flow pump | billy7590 | Main CFD Forum | 0 | July 22, 2014 17:52 |