All boundary conditions stuck in the same phase -- CFD Online Discussion Forums

June 27, 2016, 23:35	All boundary conditions stuck in the same phase	#1
morais New Member Sean Join Date: Jun 2016 Posts: 3 Rep Power: 9	Hi, I'm trying to model a multiphase flow problem and I can't seem to figure out what's going on. When I try to change the phase for any of the boundary conditions, it automatically changes the phase of every single boundary condition to match. It's the same with the cell zone conditions. When I try to set the phase of one zone to mixture and one to air, it ends up setting both to either mixture or air. Can anyone help me out with this problem? Cheers, Sean

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Radiation in semi-transparent media with surface-to-surface model?	mpeppels	CFX	11	August 22, 2019 07:30
CGNS Boundary conditions using SU2	denzell	SU2	3	July 9, 2018 05:58
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 05:21
Boundary Conditions of Phase Fractions (alpha-file)	Truehnue	OpenFOAM Pre-Processing	2	December 2, 2016 12:27
non reflective boundary conditions for incompresible flow	Pascal_doran	OpenFOAM Programming & Development	16	August 25, 2015 05:35

All times are GMT -4. The time now is 01:11.