CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

Request for Guidance in Gas-Liquid simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 3, 2017, 02:30
Post Request for Guidance in Gas-Liquid simulation
  #1
New Member
 
Ali Shehryar
Join Date: Dec 2016
Posts: 13
Rep Power: 9
Shehryar is on a distinguished road
I am trying to simulate periodic flow of a bubbly system in 2D using Eulerian model, transient. I am following a paper entitled "On the dynamics of instabilities in two-fluid models for bubbly flows" published in International journal of Chemical Engineering Science. I am working on simulating gas-liquid flows in periodic 2D domains. Applying the settings mentioned in the paper, I have run the case in ANSYS Fluent. Case has been simulated upto 30 seconds but phase 2 contour plot does show any sign of disturbance (heterogeneity).ph2contours.jpeg.jpg However the paper shows that heterogeneity starts developing after 20 seconds [Fig. 1 (b) of above mentioned paper].
I would like to request you to please spare some time to reply to my problem. Please respond to me privately i'll be very thankful for this act of kindness. i can provide the case and data file if needed.
Thanks you.

Last edited by Shehryar; July 3, 2017 at 02:32. Reason: Further Elaboration
Shehryar is offline   Reply With Quote

Reply

Tags
eulerian, gas-liquid fow, multiphase flow

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
simulation of liquid thin film Saman Main CFD Forum 4 March 11, 2018 00:55
Creating mixture material for gas dissolved in liquid richard222 Fluent Multiphase 0 May 7, 2016 13:20
[OpenFOAM] could not open file .vtk in paraview ali_atrian ParaView 8 August 27, 2014 10:31
Exhaust Gas manifold simulation shrinath Siemens 6 September 5, 2013 16:26
What is the difference between liquid reactive flow and gas reactive flow? James Main CFD Forum 6 May 15, 2009 12:14


All times are GMT -4. The time now is 23:36.