CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

How to compute FFT of the dispersed phase data?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 11, 2019, 02:47
Default How to compute FFT of the dispersed phase data?
  #1
New Member
 
Sahand
Join Date: Dec 2019
Posts: 2
Rep Power: 0
Power1996 is on a distinguished road
Hi all,

I want to capture dispersed phase volume fraction versus time data in a droplet microfluidic device in order to apply fft (fast fourier transform) on it and find the dominating droplet generation frequency. I have used VOF model in my simulations and I can see the droplets are generated. I want to do a parametric study using DOE (Design of Experiment) in surface response.

Why I need this frequency, well, I want to set this frequency as an output parameter and monitor it in my DOE.

I was thinking about using UDF for this purpose, but as I am completely new with UDF world, I do not know about its functionality. This frequency is really important for my post processing.

I know that I can use cfd-post to plot dispersed phase volume fracion vs. time and use fft option to find its dominating frequency, but I cannot set it as an output parameter to monitor it in my DOE.

Could you please tell me the ways for setting this frequency as an output parameter?
Power1996 is offline   Reply With Quote

Reply

Tags
droplet microfluidics, frequency of droplets, udf, vof model, volume fraction

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF for collecting Face data of secondary phase dean993 Fluent UDF and Scheme Programming 4 March 15, 2018 05:54
Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam) cfdonline2mohsen OpenFOAM 3 October 21, 2013 10:28
[Commercial meshers] fluentMeshToFoam multidomain mesh conversion problem Attesz OpenFOAM Meshing & Mesh Conversion 12 May 2, 2013 11:52
Which phase is dispersed in pre and post nozzle spray? Torque_Converter CFX 6 February 21, 2013 17:24
same geometry,structured and unstructured mesh,different behaviour. sharonyue OpenFOAM Running, Solving & CFD 13 January 2, 2013 23:40


All times are GMT -4. The time now is 05:07.