CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

Parametric Analysis of Pressure Drop

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 17, 2020, 08:10
Post Parametric Analysis of Pressure Drop
  #1
Member
 
Raj
Join Date: Jan 2020
Posts: 92
Rep Power: 6
Rajkool is on a distinguished road
Hello all,

I hope everyone is doing good in this pandemic situation.

I am working on the sample model. I want to calculate the pressure drop. But, with multiple velocities with a single diameter of the pipe. So, I want to use Parametric analysis for ease of work. Unfortunately, I am unable to get the Output parameter.

Could you please guide me or help me with the instructions to get the pressure as output parameter?

Thank you in advance,
Raj
Rajkool is offline   Reply With Quote

Reply

Tags
parameteric analysis, pressure drop

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Polydispersed phase pressure drop with drop size Laksh CFX 1 June 8, 2017 19:56
Computed Pressure Drop is lower than experimental data Ash Kot FLUENT 2 May 17, 2017 10:41
lower pressure drop compared to experimental value in Two phase flow calculations. Ash Kot Fluent Multiphase 0 May 16, 2017 17:29
Orifice-Pipe Problem CFXMUFFIN CFX 3 July 16, 2015 19:57
total pressure and pressure drop omaralyahia CFX 5 July 14, 2015 09:13


All times are GMT -4. The time now is 00:37.