Initialization of 2 phase flow and contours issue -- CFD Online Discussion Forums

November 22, 2020, 02:50	Initialization of 2 phase flow and contours issue	#1
henry_cfd_questions New Member Join Date: Mar 2018 Posts: 11 Rep Power: 8	Dear CFD experts, I am working on a 2 phase flow model and following all steps to generate the air fraction which is a bubble inside a channel. Then patch, initialize, and check contours for air phase, fluent doesn't show the air bubble. I am not sure what I do wrong but I have done this before and I did not have a problem with this part. Please let me know if you can help, this is very frustrating. Thanks, everyone.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM] contours for flow depths in paraview	moraza	ParaView	5	August 30, 2019 07:59
Pressure contours in two compressible phase flow	Hershey	Fluent Multiphase	1	June 6, 2014 07:41
Iso contours (volume flow visualisation) in OpenFOAM	devesh.baghel	OpenFOAM	0	December 14, 2009 06:59
Why Contours not display in turb. flow over Cyl.?	Mahbub	FLUENT	2	August 12, 2007 11:10
how to erport one phase date in two phase flow	KUI	FLUENT	0	November 8, 2006 08:46

All times are GMT -4. The time now is 00:10.