CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent UDF and Scheme Programming

UDF for cell zone condition

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   January 23, 2013, 15:43
Question UDF for cell zone condition
New Member
Rachana Vidhi
Join Date: Dec 2012
Posts: 8
Rep Power: 13
rachana is on a distinguished road
Hi, I am modeling a system in which the temperature of a large block needs to change with time and with depth (inside the block). A thin pipe (carrying hot liquid) is passing through the block and the temperature of the block around the pipe is affected by that.

So, how do I provide a time-dependent cell zone temperature condition? I cannot use "Fixed value" because the temperature profile inside the block needs to be affected by the pipe. Can I use "Source term" somehow for this?

I think I will be able to make the UDF but how (and where) do I use it? Please help me out.
rachana is offline   Reply With Quote


cell zones, fixed value., source term, time dependent, udf

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] periodic faces not matching Aadhavan ANSYS Meshing & Geometry 6 August 31, 2013 11:25
UDF fluent, Cell Zone natantyt Fluent UDF and Scheme Programming 1 August 30, 2011 15:18
Boundary Condition Types Using Scheme and UDF Nasir FLUENT 0 September 15, 2008 21:54
Wall boundary condition – UDF Ssn FLUENT 0 January 25, 2008 03:43
udf as Boundary condition anup FLUENT 2 May 23, 2007 11:51

All times are GMT -4. The time now is 05:19.