[silvi]

Hello!
I tried to interpret my inlet profile udf and it occurs an error:

cpp:inlet_profile_6.c: value too large for defined data type
Error:" inlet_profile_6.c" line1: syntax error.
we're using a terminal to launch fluent on a cluster. the version is fluent 13

and the udf is:

#include "udf.h"
#define a0 3573.860361
#define a1 824.1014636
#define b1 848.3188461
#define a2 -72.89079078
#define b2 142.0899859
#define a3 -206.9491044
#define b3 38.05716879
#define a4 -35.63104124
#define b4 6.608799463
#define a5 -42.64628096
#define b5 -30.45040677
#define a6 1.44034143
#define b6 19.22563745

DEFINE_PROFILE(pressure_inlet,thread,id)
{
real omega, flow_time, pressure;
face_t f;
omega=(2*3.14)/0.8;
flow_time= CURRENT_TIME;
begin_f_loop (f,thread)
{
F_PROFILE(f,thread,id) = a0+a1*cos(omega*flow_time)+a2*cos(2*omega*flow_tim e)+a3*cos(3*omega*flow_time)+a4*cos(4*omega*flow_t ime)+a5*cos(5*omega*flow_time)+a6*cos(6*omega*flow _time)+b1*sin(omega*flow_time)+b2*sin(2*omega*flow _time)+b3*sin(3*omega*flow_time)+b4*sin(4*omega*fl ow_time)+b5*sin(5*omega*flow_time)+b6*sin(6*omega* flow_time);
}
end_f_loop (f,thread)
}

Thank you