CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Fluent UDF and Scheme Programming

interior face: breaking of a membrane

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 31, 2017, 00:38
Default interior face: breaking of a membrane
  #1
New Member
 
Join Date: Jun 2015
Posts: 12
Rep Power: 4
Ohlzen-Wendy is on a distinguished road
Hi everybody,

I hope you can help me on the following problem:
to
I have a Simulation of a closed chamber with one inlet an interface to an outlet.
these interior face is some kind of paper membrane which will brake if a specific relative pressure has been reached.

This means:
1. time dependent inlet into the chamber
2. The pressure is increasing inside the chamber
3. the membrane will break
- an outflow is possible
- the membrane will not close again

has anybody an idea how to realize this?

I have uploaded a simply example for ansys WB 18.0 under the following link:the face I am talking about is the "membran"
https://jedhoc.edag.de/download.php?...37532458071931

best wishes

Andreas
Ohlzen-Wendy is offline   Reply With Quote

Reply

Tags
fluent, interior, membrane, udf

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
flow through membrane Geethu g FLUENT 0 June 18, 2014 01:04
Seeking help in designing three types of deformable membrane boundary. beancurd70 OpenFOAM Programming & Development 2 October 1, 2013 16:23
gas diffusion through membrane sosat1012 CFX 0 September 8, 2010 08:14
CFD Animations of breaking waves Dommermuth Main CFD Forum 0 June 17, 2009 11:47
mass transfer from fluids to membrane Peter FLUENT 0 August 2, 2002 14:27


All times are GMT -4. The time now is 16:01.