UDF for Thermodynamic property function of P and T

Federer83 · February 4, 2019, 16:12

Hi guys,

I have created a thermodynamic database for my fluid function of P and T and i would like to use it in my FLUENT calculation.
I heard that in the past this was not possible in FLUENT. Is this problem being solved with the newest version?
If so, how can i write an UDF to run my simulation?

Many thanks in advance,

pakk · February 5, 2019, 05:02

Have you checked the Fluent help? It is practically there in the "Define_Property UDFs" section.

Federer83 · February 6, 2019, 11:32

Thanks Pakk. Yes I have checked the DEFINE_Property function, however i didnt get it if this could work also for the specific heat. I have a matrix for specific heat function of pressure and temperature and i would like to use it since my fluid is affected by big pressure an temperature drops. Do you know if it is possible?

AlexanderZ · February 11, 2019, 00:45

for specific heat use DEFINE_SPECIFIC_HEAT macro

best regards

Federer83 · February 11, 2019, 08:03

Hi Alexanderz

Do you think i can set the cp function of the P and T with this function? I read that you can only specify the variation of the cP with T.

AlexanderZ · February 11, 2019, 21:24

I remember same information, only T. But you may try, it is not so difficult

best regards

Bluewave · February 12, 2019, 04:41

It's definitely possible using Define_Property macros. I have used it earlier to model high temperature transport properties using chapman-enskog method. You can try

February 4, 2019, 16:12	UDF for Thermodynamic property function of P and T	#1
Federer83 New Member Fab Join Date: Dec 2018 Posts: 13 Rep Power: 7	Hi guys, I have created a thermodynamic database for my fluid function of P and T and i would like to use it in my FLUENT calculation. I heard that in the past this was not possible in FLUENT. Is this problem being solved with the newest version? If so, how can i write an UDF to run my simulation? Many thanks in advance,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] mesh airfoil NACA0012	anand_30	OpenFOAM Meshing & Mesh Conversion	13	March 7, 2022 17:22
foamToTecplot360	thomasduerr	OpenFOAM Post-Processing	121	June 11, 2021 10:05
[FLUENT] Loading UDF function problems	Faggio11	FLUENT	0	August 9, 2016 06:33
[blockMesh] error message with modeling a cube with a hold at the center	hsingtzu	OpenFOAM Meshing & Mesh Conversion	2	March 14, 2012 09:56
Version 15 on Mac OS X	gschaider	OpenFOAM Installation	113	December 2, 2009 10:23

February 5, 2019, 05:02		#2
pakk Senior Member Join Date: Nov 2013 Posts: 1,965 Rep Power: 26	Have you checked the Fluent help? It is practically there in the "Define_Property UDFs" section.

February 6, 2019, 11:32		#3
Federer83 New Member Fab Join Date: Dec 2018 Posts: 13 Rep Power: 7	Thanks Pakk. Yes I have checked the DEFINE_Property function, however i didnt get it if this could work also for the specific heat. I have a matrix for specific heat function of pressure and temperature and i would like to use it since my fluid is affected by big pressure an temperature drops. Do you know if it is possible?

February 11, 2019, 00:45		#4
AlexanderZ Senior Member Alexander Join Date: Apr 2013 Posts: 2,363 Rep Power: 34	for specific heat use DEFINE_SPECIFIC_HEAT macro best regards

February 11, 2019, 08:03		#5
Federer83 New Member Fab Join Date: Dec 2018 Posts: 13 Rep Power: 7	Hi Alexanderz Do you think i can set the cp function of the P and T with this function? I read that you can only specify the variation of the cP with T.

February 11, 2019, 21:24		#6
AlexanderZ Senior Member Alexander Join Date: Apr 2013 Posts: 2,363 Rep Power: 34	I remember same information, only T. But you may try, it is not so difficult best regards

February 12, 2019, 04:41		#7
Bluewave New Member SS Join Date: Sep 2018 Posts: 6 Rep Power: 7	It's definitely possible using Define_Property macros. I have used it earlier to model high temperature transport properties using chapman-enskog method. You can try