CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent UDF and Scheme Programming

Create different zones for magnetic field within a large zone

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 22, 2020, 05:43
Default Create different zones for magnetic field within a large zone
  #1
New Member
 
Aashna Raj
Join Date: May 2019
Posts: 7
Rep Power: 7
aashna@iitp is on a distinguished road
I am trying to do MHD simulation in Ansys Fluent 19.1.
There are two parallel plates across which magnetic field has to be applied. But I don't know how to specify a rectangular zone within the space between the plates to which magnetic field can be applied.

If the magnetic field has to be applied, say just in the middle zone, how should I divide my 2D geometry into different zones.
Kindly help?

Thanks and regards.
aashna@iitp is offline   Reply With Quote

Old   January 23, 2020, 06:44
Default
  #2
New Member
 
Aashna Raj
Join Date: May 2019
Posts: 7
Rep Power: 7
aashna@iitp is on a distinguished road
Got the method. I tried to use face split and it worked!!
aashna@iitp is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
Journal file error magicalmarshmallow FLUENT 3 April 4, 2014 13:25
Problem with rhoSimpleFoam matteo_gautero OpenFOAM Running, Solving & CFD 0 February 28, 2008 07:51
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 20:49.