CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Eulerian wall film model

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   May 29, 2012, 22:54
Default Eulerian wall film model
New Member
Lei Yu
Join Date: May 2012
Posts: 1
Rep Power: 0
lei_ct is on a distinguished road
Hello All,

I am simulating aftertreatment SCR process. In the modeling I used eulerian wall film model and activatee the DPM collection. But in the calculation Fluent doesn't collect particls in fact. At last I found I must set how often the DPM phase is calculated for the film. But unluckily I can't let DPM contol available in the tab of solution method and control. Have you met the silimar problem? If you have, could you help me to solve this problem. Thank you very much!

Best regards,
Lei Yu
lei_ct is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Near wall treatment in k-omega SST Arnoldinho OpenFOAM Running, Solving & CFD 38 March 8, 2017 13:48
Superlinear speedup in OpenFOAM 13 msrinath80 OpenFOAM Running, Solving & CFD 18 March 3, 2015 05:36
Water subcooled boiling Attesz CFX 7 January 5, 2013 03:32
Erosion model and Eulerian Model leonozx FLUENT 0 April 7, 2011 05:45
Mixture and Eulerian Model Hassid S. FLUENT 1 August 9, 2007 07:24

All times are GMT -4. The time now is 18:54.