how to remove shadow in boundary condition in ansys fluent

ASAD · July 13, 2013, 12:28

How to remove shadow in boundary condition in ansys fluent

Far · July 14, 2013, 04:58

why you want to remove the shadow boundary. It has in fact a double sided wall (wall + wall shadow) when you have fluid on both sides of wall. So it is just normal to have shadow

Jim87 · July 14, 2013, 17:48

I agree Far. Shadows walls are the normal case for fluid-solid contact zones.

In previous projects I had problems with damaged geometries, what leads to wrong boundary conditions.

- Can you mention whats your geometry format or why you want to remove shadows?

July 13, 2013, 12:28	how to remove shadow in boundary condition in ansys fluent	#1
ASAD New Member TARIQ JAVED Join Date: Jul 2013 Posts: 8 Rep Power: 12	How to remove shadow in boundary condition in ansys fluent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Time dependant pressure boundary condition	yosuke1984	OpenFOAM Verification & Validation	3	May 6, 2015 06:16
Radiation interface	hinca	CFX	15	January 26, 2014 17:11
An error has occurred in cfx5solve:	volo87	CFX	5	June 14, 2013 17:44
Assigning data points as boundary condition using fluent	ripong	Fluent UDF and Scheme Programming	2	August 31, 2012 05:03
How to set boundary condition in Fluent for the fo	Peiyong	FLUENT	1	November 10, 2006 11:44

July 14, 2013, 04:58		#2
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	why you want to remove the shadow boundary. It has in fact a double sided wall (wall + wall shadow) when you have fluid on both sides of wall. So it is just normal to have shadow

July 14, 2013, 17:48		#3
Jim87 Member Stephan Langenberg Join Date: Sep 2011 Location: Germany Posts: 73 Rep Power: 14	I agree Far. Shadows walls are the normal case for fluid-solid contact zones. In previous projects I had problems with damaged geometries, what leads to wrong boundary conditions. - Can you mention whats your geometry format or why you want to remove shadows?