how to set-up a Hydrocyclone?

Tzu-Chien · March 19, 2015, 22:15

Hi everybody!

I am a student and I try to setup non-Newtonian fluids in hydrocyclone separator. But it still does not work.

I read some information on the internet. It used k-epsilon model,But I want to use reynold stress model for it.

Please help me.

Thanks

mcampbell · April 29, 2015, 13:29

I am running the same problem in CFX. I have found that the Shear Stress Transport (SST) turbulence model with curvature correction (CC) activated simulates the flow well while avoiding the complexities associated with LES or RSM. With that said this is not a trivial solution. Addressing the air core is critical. I have been verifying my model to the original Hsieh experimental data found in his 1988 Disertation. While my velocity proflies match well I am currently having issuses with my calculated pressure drop being too low. The next step is to include the shear-thnning material in my model. My advice would be to model something you can check and read up on the subject, there is a ton of literature out there...

March 19, 2015, 22:15	how to set-up a Hydrocyclone?	#1
Tzu-Chien New Member 洪子倩 Join Date: Mar 2015 Posts: 1 Rep Power: 0	Hi everybody! I am a student and I try to setup non-Newtonian fluids in hydrocyclone separator. But it still does not work. I read some information on the internet. It used k-epsilon model,But I want to use reynold stress model for it. Please help me. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TimeVaryingMappedFixedValue	irishdave	OpenFOAM Running, Solving & CFD	32	June 16, 2021 06:55
[General] 2 datas on one plot	Akuji	ParaView	46	December 1, 2013 14:06
How to show the transient case?	H.P.LIU	Phoenics	7	July 13, 2010 04:31
Env variable not set	gruber2	OpenFOAM Installation	5	December 30, 2005 04:27
Ibm java gcc	rrr	OpenFOAM Installation	2	December 30, 2005 04:18

April 29, 2015, 13:29		#2
mcampbell New Member Matt Campbell Join Date: Apr 2015 Posts: 6 Rep Power: 10	I am running the same problem in CFX. I have found that the Shear Stress Transport (SST) turbulence model with curvature correction (CC) activated simulates the flow well while avoiding the complexities associated with LES or RSM. With that said this is not a trivial solution. Addressing the air core is critical. I have been verifying my model to the original Hsieh experimental data found in his 1988 Disertation. While my velocity proflies match well I am currently having issuses with my calculated pressure drop being too low. The next step is to include the shear-thnning material in my model. My advice would be to model something you can check and read up on the subject, there is a ton of literature out there...