|
[Sponsors] |
Von-Karman vortex street - Reynolds number range |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 21, 2015, 14:43 |
Von-Karman vortex street - Reynolds number range
|
#1 |
New Member
nima
Join Date: Sep 2011
Posts: 26
Rep Power: 14 |
Dear Friends,
I am trying to model flow around a 2D cylinder in Fluent 6.3 and capture vortices shedding. I did the same project in Reynolds number ranging 100-4500 with reasonable results. But now I am doing a project with Air as fluid and cylinder diameter of 0.05 m. other specifications are: V = 10 m/s Solver = unsteady 2nd order Viscous = k-e standars solution=second order upwind time step=0.005 time = up to 100 s (even more sometimes) My reynolds number is around 10000. I am not sure if I should expect von karman vortex street in this reynolds number. my result is only a fully developed and symmetric flow behind the cylinder without any vortex. attached picture is contour of vorticity magnitude Help me if there is a reynold range for vortex shedding in cylinder case. Thanks |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
decomposePar pointfield | flying | OpenFOAM Running, Solving & CFD | 28 | December 30, 2013 15:05 |
CFX Error - Reynolds number out of range | saisanthoshm88 | CFX | 3 | May 11, 2012 07:04 |
Karman Vortex street | Apocolapse | STAR-CCM+ | 2 | December 12, 2011 10:53 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |
Kármán vortex street (article)? | Vortexstr | Main CFD Forum | 0 | February 9, 2000 06:47 |